Shop

Description

BMW E30 Universal Sump Guard, Also for Engine Swaps

This BMW E30 universal sump guard is a steel skid plate that shields the sump of your E30 against kerbs, stones, speed bumps and loose surfaces. It fits the original E30 engines, but also engines that have been put into the car via a swap.

Especially on an E30 that is lowered and goes on track or into the forest, the sump hangs vulnerably low. A crack in the sump means oil loss and, in the worst case, engine damage. With a BMW E30 universal sump guard underneath you drive with peace of mind, even if the ground comes closer than planned for once.

Key benefits of this BMW E30 universal sump guard

• Fits original and swapped engines in the E30
• 100% Domex 700: wear-resistant steel that can handle scraping
• 3 mm sheet thickness for sturdy protection
• Extra reinforced sides, so the plate does not bend easily
• CNC laser-cut and bent on a press brake
• TIG-welded for neat, strong welds
• Proven in drift and rally

Suitable for

BMW 3 Series E30

• BMW 3 Series E30 with the original engine
• BMW E30 with a swapped engine

If you are fitting an engine that was not standard in the E30, check that the sump falls within the plate. If in doubt, send us the engine type.

Technical specifications

• Item number: 0022
• Application: protection of the sump (oil pan) on the underside
• Material: Domex 700, wear-resistant steel
• Sheet thickness: 3 mm
• Sides: extra reinforced
• Production: CNC laser-cut, bent on a press brake, TIG-welded
• Weight: 7.66 kg

Installation and delivery

The BMW E30 universal sump guard goes under the front of the car and shields the sump from below. Exactly which mounting points are used and whether bolts are included is not specified. So allow for your own mounting hardware and check the fit on your car beforehand.

Put the car safely on axle stands and first hold the plate loosely in place before you fix anything. Check that there is enough space left between the plate and the sump, so that an impact is not passed straight on to the sump. Check the mounting after every track day, especially after a trip over the kerbs. If the plate is loose or you hear it rattling, tighten it again immediately before you drive on.

You will find more underbody protection and reinforcements in our x-brace and sump guard category. If you also want to make the underside of the front end stiffer, take a look at the lower strut bar for the E30, which is matched to this plate.

A broken sump costs a track day, an engine or both. A steel plate underneath costs much less.

Why choose this BMW E30 universal sump guard?

Many E30 projects get a different engine sooner or later. This plate is designed for that and stays usable after a swap. The wear-resistant 3 mm Domex 700 with reinforced sides can take a good knock, and the plate has been tested in drift and rally. It protects not only the sump, but also everything behind it.

Frequently asked questions

Does this plate fit an E30 with a different engine?

Yes, the BMW E30 universal sump guard is intended for both the original E30 engines and swapped engines. With a swap, do check the fit.

What material is the BMW E30 universal sump guard made of?

3 mm thick Domex 700, a wear-resistant steel, with extra reinforced sides.

How heavy is the plate?

The guard weighs 7.66 kg.

Is mounting hardware included?

That is not stated. Count on your own bolts and feel free to ask us if you are unsure.

Is this only for rally?

No. In drifting, track work or on a lowered E30 on the road, the plate also protects the sump against kerbs and speed bumps.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.